Site Search
Latest Topics
UNIX
[AIX]How to setup to enable syslog in AIX?
syslog is one of the best logging utilities,The errpt logging is enabled by default in AIX. To enable syslog, /etc/syslog.conf file must be modified, here are the steps:
1. append follow in syslog.conf file:
*.debug /usr/syslog.log
*.info /usr/syslog.log
[AIX.DMX]How to configure AIX devices after symm(device) configuration change?
In situations below, the disk devices will require re-configuration:
1. Converting SRDF from/to Non-SRDF device
2. Due to host failure or planned maintenance, RDF1 (R1) and RDF2 (R2) are swapped
3. Symmetrix FA ports attached to the host have sc3/sc2 bit set
[AIX] How to match AIX Hdisk number to Clariion Array LUN number?
Run the lsattr command and evaluate the target_id and lun_id output. Navisphere Manager displays for CLARiiON LUNs. After you use the AIX lsdev command to display the hdisks, execute the following lsattr command for each hdisk:
More Articles...
- [AIX]Difference between AIX Maintenance Level(ML), Technology Level(TL) and Service Pack
- [AIX]Why there are ghost LUNs(LUNz) presented to host?
- [SAN HPUX]How to setup host connectivity for HPUX 11iV3 that connects to Clariion without Powerpath
- [SAN Storage] Multipath Software for P5 VIO
- [SAN-HPUX] How to find out the CLARiiON LUN number based on the HPUX host device output?
- [AIX] How to increase the size of a logical volume?
- [AIX] How to create a logical volume?
- [AIX] How to increase /reduce a paging space?
- [AIX] How to remove a file system?
- [AIX]How to defragment a file system?
- [AIX] How to mount a CD/DVD?
- [AIX] How to change the size of a file system?
- [AIX] How to create a file system?
- [AIX] How to change between kernel modes in AIX?
- [AIX]How to find out what kernel mode AIX is running at?
- [AIX]How to Displaying program output and copying to a file (tee command)
- [AIX]How to resolve LED 581 issue during system bootup?
- [AIX]How to show the boot sequence on AIX?
- [AIX]How to clear AIX software entries in error log?
- [AIX] How to restart network service in AIX environment?
- [AIX]What is the recovery procedure when system hangs with LED 552, 554 or 556?
- [AIX]How to disable auto-mount for AIX file system?
- [AIX] Server LED Code alternating 0223 and 0229(or FCE,FD2 or FDO on RS/6000) and not booting up?
- [AIX]How to check if AIX is 64bit enabled?
- [AIX]What is the quickest way to show the hardware configuration of AIX system?
Page 1 of 3
